Tianjin Bohai Metal Corporation

ASTM A333 Seamless Low Temperature Steel Pipe

Steel Pipe

Seamless Steel Pipe

Get a price

hiddenValue

Product Detail
| Technical Information
| Packaging

Commodity name: ASTM A333 Seamless Low Temperature Steel Pipe

Product introduction

ASTM A333 is the standard specification given to all the welded as well as seamless steel, carbon and alloy pipes which are intended to be used at places of low temperatures. The ASTM A333 pipes are used as heat exchanger pipes and pressure vessel pipes.

As it was stated in the above section, that these pipes are used in the areas where temperature is extremely low, they are used in large ice cream industries, chemical industries and other such places. They are used as transportation pipes and are categorized into different grades. The classification of grades of these pipes is done on different factors like temperature resistance, tensile strength, yielding strength and chemical compositions. The ASTM A333 pipes are furnished into nine different grades which are designated by the following numbers:1,3,4,6.7,8,9,10, and 11.

Specification	ASTM A333/ASME SA333
Type	Hot Rolled/Cold Drawn
Outer Diameter Size	1/4"NB TO 30"NB(Nominal Bore Size)
Wall Thickness	schedule 20 To Schedule XXS(Heavier On Request) Up to 250 mm Thickness
Length	5 To 7 Meters,09 To 13 Meters, Single Random Length, Double Random Length And Customize Size.
Pipe Ends	Plain Ends/Beveled Ends/threaded Ends/Coupling
Surface Coating	Epoxy Coating/Colour Paint Coating/3LPE Coating.
Delivery Conditions	As Rolled. Normalizing Rolled, Thermomechanical Rolled /Formed, Normalizing Formed, Normalized and Tempered/Quenched and Tempered-BR/N/Q/T
MOQ	1 tons
Delivery Time	10-30 days
Trade Item	FOB CIF CFR PPU PPD
Packaging	Loose/Bundle/Wooden Pallet/Wooden Box/Plastic Cloth Wraps /Plastic End Caps/Beveled Protector

These pipes have an NPS 2"to 36". Though different grades have different temperature strike test the average temperature that these pipes can stand is from-45 degree C, to-195 degree C. The ASTM A333 pipes must be made with the seamless or welding process where there must be no filler in the metal during the welding process.

ASTM A333 standard covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. ASTM A333 alloy pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation. All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.

ASTM A333 steel pipe production includes a series of visual surface imperfections to guarantee that they have been properly manufactured. ASTM A333 steel pipe shall be subject to rejection if surface imperfections acceptable are not scattered, but appear over a large area in excess of what is considered a workmanlike finish. The finished pipe shall be reasonably straight.

Technical data

Chemical Requirements

	C(max)	Mn	P(max)	S(max)	Si	Ni
Grade 1	0.03	0.40 – 1.06	0.025	0.025
Grade 3	0.19	0.31 – 0.64	0.025	0.025	0.18 – 0.37	3.18 – 3.82
Grade 6	0.3	0.29 – 1.06	0.025	0.025	0.10 (min)

Yield and Tensile Strength

ASTM A333 Grade 1
Minimum Yield	30,000 PSI
Minimum Tensile	55,000 PSI
ASTM A333 Grade 3
Minimum Yield	35,000 PSI
Minimum Tensile	65,000 PSI
ASTM A333 Grade 6
Minimum Yield	35,000 PSI
Minimum Tensile	60,000 PSI