321 SS Plates

321 SS Plates

undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined
321 stainless steel plates are part of the austenitic family of stainless steel. 321 is basically a 304 grade containing a stabilizer of titanium. Type 321 is a good choice for applications where heat is an issue. 321 can be used in applications up to 900°C where 304 is normally used up to 500°C.

图片名称

hiddenValue

  • Product Detail
  • | Technical Information
  • | Packaging
    • Commodity name: 321 SS Plates

    321 stainless steel plates are part of the austenitic family of stainless steel. 321 is basically a 304 grade containing a stabilizer of titanium. Type 321 is a good choice for applications where heat is an issue. 321 can be used in applications up to 900°C where 304 is normally used up to 500°C.

    Product information

    321 SS is a titanium stabilized austenitic chromium-nickel stainless steel which was developed to provide an 18-8 type alloy with improved intergranular-corrosion resistance. This material is stabilized against chromium carbide formation by the addition of titanium. Since titanium has a stronger affinity for carbon than chromium, titanium carbide precipitates within the grains instead of forming at the grain boundaries.
    321 stainless steel should be considered for applications requiring intermittent heating between 800ºF (427ºC) and 1650ºF (899ºC), or for welding under conditions which prevent a post-weld anneal.  321 stainless steel is non-magnetic. SS 321 Coil / Strip stockist and exporter in India, View AISI 321 foil Price List Ex Mumbai and DIN 1.4541 / WNR 1.4878 Plate price per meter in USD

    • Grade 321/321H
    • ASTM A240, ASME SA240, BS EN 10028-7, BS EN 10088-2 and BS EN 10088-4
    • EN 10088/2, EN 10088/4 and CE Marking
    • NACE MR 0175/ISO 15156 Certification
    Product Type 321 Stainless Steel Sheet, 321 Stainless Steel Plate
    Specification ASTM A240 321 / ASME SA 240 321
    Tolerances (width / thickness)
    • EN 10258/ DIN 59381)
    • EN 10151 ASTM A240 Grade 321 Strips
    • EN 10088 A240 Tp 321 strips
    International Standard
    • ASTM A 480
    • ASTM A 959
    • ASME IID
    • EN ISO 9445
    • EN ISO 18286
    • EN 10051
    • EN 10088-1
    • ISO 15510
    ASTM A240 321 material Dimensions
    • Cold rolled 321 Stainless Steel Plate 0.5-6.4 mm
    • Hot rolled 321 Stainless Steel Plate 3.0–10.0 mm
    Thickness 0.1 to 100 mm Thk
    Width 10-2500mm
    Length 2m, 2.44m, 3m, or as required
    Finish SATIN, 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), No.1 finish hot rolled, 1D, No.4, BA, 8K, hairline, brush, mirror etc.
    Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard
    Forms / Shapes Plate, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate,
    Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
    Other Trade Name of 321 Stainless Sheet SS 321, SUS 321, Inox 321, DIN 1.4541, UNS S32100, AISI 321, SAE 321 Sheet

    Technical data

    Chemical Analysis

    Weight % (all values are maximum unless a range is otherwise indicated)

    SA 240 gr 321 Chemical Composition

    SS Grade C Si Mn P S Cr Mo Ni N Other
    Type 321 min.
    max
    -
    00.08
    00.75 2.00 00.045 00.030 17.0
    19.0
    - 9.0
    12.0
    00.10 Ti=5(C+N)
    00.70
    Type 321H min.
    max
    00.04
    00.10
    00.75 2.00 00.045 00.030 17.0
    19.0
    - 9.0
    12.0
    - Ti=4(C+N)
    00.70
    Type 347 min.
    max
    00.08 00.75 2.00 00.045 00.030 17.0
    19.0
    - 9.0
    13.0
    - Nb=10(C+N)
    1.0

    Stainless Steel 321 Mechanical Properties

    SS Type Tensile Strength minimum (MPa) Yield Strength 0.2% Proof minimum (MPa) Elongation minimum (% in 50mm) Hardness
    Rockwell B (HR B) maximum Brinell (HB) maximum
    321 515 205 40 95 217
    321H 515 205 40 95 217
    347 515 205 40 92 201

     
    FAQ
    1.What are your company's main products ?
    Our company's main products include stainless steel pipe /sheet.
    2.How do you promise your product's quality?
    Mill Test Certification will be provided to you and theThird Party Inspection is avialable..
    3.Can you provide samples?
    Yes, we can. If necessary, we'll give them to you freely.
    4.Where are your advantages when we compared your company with others?
    Firstly, our goods are superior in quality and cheap in price. And then we can let you enjoy the best sevice.
    5. Can you produce the products according to my own drawings? Yes, we can produce the products according to your drawings that will be most satisfy you.

    Key words:
    • 321 SS Plates

Get a Free Quote


To: Tianjin Bohai Metal Company


Action
I would like some more details. Product Requirements: Customization: Delivery Time: Payment: Shipping: Usage:
((Max 5 files. Support jpg, jpeg, png, gif, txt, doc, pdf, xls, docx, xlsx, less than 5MB))

Contact & Optional Details

Send Inquiry Now