LR Grade AH40 DH40 EH40 FH40 Marine Steel Plate

LR Grade AH40 DH40 EH40 FH40 Marine Steel Plate

undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined
Marine steel plate refers to structural steel used in ship building. It is considered a marine grade and must be able to resist corrosive effects that are common in a water environment. To achieve this, special alloying elements are added to these grades in order to defend agaist corrosion.While most carbon steel is not suited for marine environments, there are several marine grade carbon steels that have been approved by the different societies for shipbuilding applications.

图片名称

hiddenValue

  • Product Detail
  • | Technical Information
  • | Packaging
    • Commodity name: LR Grade AH40 DH40 EH40 FH40 Marine Steel Plate

    Marine steel plate refers to structural steel used in ship building. It is considered a marine grade and must be able to resist corrosive effects that are common in a water environment. To achieve this, special alloying elements are added to these grades in order to defend agaist corrosion.While most carbon steel is not suited for marine environments, there are several marine grade carbon steels that have been approved by the different societies for shipbuilding applications.

    Brief introduction of marine steel plate
    Marine steel plate refers to structural steel used in ship building. It is considered a marine grade and must be able to resist corrosive effects that are common in a water environment. To achieve this, special alloying elements are added to these grades in order to defend agaist corrosion.While most carbon steel is not suited for marine environments, there are several marine grade carbon steels that have been approved by the different societies for shipbuilding applications.

    Structural steel for ship hulls is divided into strength classes according to its minimum yield strength: general strength structural steel and high strength structural steel. Maine steel plate refers to hot rolled steel plate produced in accordance with the requirements of the classication society for the construction of ship hull structures.

    There are 9 main classification societies in worldwide.
    A.B.S    American Bureau of Shipping
    B.V.     Bureau Veritas
    C.C.S.   China Classification Society
    D.N.V   Det Norske Veritas
    G.L.    Germanischer Lloyd
    K.R.    Korean Register of Shipping
    L.R.    Lloyd’s Register of Shipping
    N.K.    Nippon Kaiji Kyokai
    R.I.N.A  Registro Italiano Navale

    Grade DH40 steel impact force at  0 ° C
    Grade DH40 steel impact force at  -20 ° C
    Grade EH40 steel impact force at -40 ° C
    Grade FH40 steel impact force at -60 ° C

    Shot blasting service
    Shot blasting is a method used to clean or polish steel when enhanced surface finishes are required. Shot blasting is used in almost every industry we serve. Especially in shipbuilding, rail,structural fabrication and more.

    Specifications range
    Thickness:2.5-120mm
    Width:1000-3000mm
    Length: As request
     
    Chemical composition and mechanical properties
    Chemical Composition
    Steel grade C Si Mn P S Als
    Grade AH40 ≤0.18 ≤0.50 0.9-1.6 ≤0.035 ≤0.035 ≥0.015
    Grade DH40 ≤0.18 ≤0.50 0.9-1.6 ≤0.035 ≤0.035 ≥0.015
    Grade EH40 ≤0.18 ≤0.50 0.9-1.6 ≤0.035 ≤0.035 ≥0.015
    Grade FH40 ≤0.18 ≤0.50 0.9-1.6 ≤0.035 ≤0.035 ≥0.015

    Processing for Different Grades
    Grade D, E (DH32, DH36, EH 32, EH 36)
    Grade D and E series (inlcuding AH32/36, DH32, DH36, EH32, EH36) shipbuilding steel plates require good low temperature toughness and good welding performance. The production high-strength shipbuilding steel plate needs to be normalized by means of controlled rolling and controlled cooling or heat treatment processes with more complete equipment. At the same time, the internal steel purity of the supplied billets is required to be high, especially the content of S, P, N, 0 and H in the steel should be strictly controlled.

    Alloy Elements Added to Improve Toughness
    In order to ensure the performance of high-strength ship plates, micro-alloying technology is adopted. By adding Nb, V, Ti and other alloying elements to the steel, combined with the controlled rolling process, the grain is refined and the toughness is improved.
    Direction of Development for Shipbuilding Plate
    High strength, high specification, with the ship's large-scale and safety, and changes in coating specifications, the demand for ordinary A-class panels is gradually reduced, and the demand for high-strength panels is increasing, which is concentrated in large ships of 5m wide. Plate, 200-300mm thickness special thick ship board.

    Mechanical Properties
    Steel grade Yield point/MPa Tensile point /MPa Elongation/% Temperature/° C V-type impact test
    Akv/J
    ≤50MM 50-70MM 70-100MM
    Grade AH40 ≥390 510-660 ≥20 0 41/21 - -
    Grade DH40 ≥390 510-660 ≥20 -20 41/21 - -
    Grade EH40 ≥390 510-660 ≥20 -40 41/21 - -
    Grade FH40 ≥390 510-660 ≥20 -60 41/21 - -

Get a Free Quote


To: Tianjin Bohai Metal Company


Action
I would like some more details. Product Requirements: Customization: Delivery Time: Payment: Shipping: Usage:
((Max 5 files. Support jpg, jpeg, png, gif, txt, doc, pdf, xls, docx, xlsx, less than 5MB))

Contact & Optional Details

Send Inquiry Now