6061-T6 Aluminum bar

6061-T6 Aluminum bar

undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined
061 aluminum alloy T6 hardness standard data and functions: ① The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.

图片名称

hiddenValue

  • Product Detail
  • | Technical Information
  • | Packaging
    • Commodity name: 6061-T6 Aluminum bar

    061 aluminum alloy T6 hardness standard data and functions: ① The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.

    6061 aluminum alloy T6 hardness standard data and functions:
    ① The main alloying elements in 6061 alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
    ② The main alloying elements of 6061 aluminum alloy are magnesium and silicon, and Mg2Si phase is formed. If contain a certain amount of manganese and chromium, can neutralize the bad effect of iron; Sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; There is also a small amount of copper in the conductive material to offset the bad effects of titanium and iron on electrical conductivity; Zirconium or titanium can refine grain and control recrystallization structure. Lead and bismuth are added to improve machinability. Mg2Si is solidly dissolved in aluminum, which makes the alloy have the function of artificial age hardening. The main alloying elements in 6061 aluminum alloy are magnesium and silicon, with moderate strength, good corrosion resistance, weldability and good oxidation effect.
    (3) Alcoa 6061-T651 is the main alloy of 6 series, which is a high quality aluminum alloy product after heat treatment and pre-drawing process; Alcoa 6061 has excellent machining performance, good corrosion resistance, high toughness and no deformation after processing, easy coloring film, excellent oxidation effect and other excellent characteristics

    Aluminum is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used. Aluminum has good reflection performance of light, reflecting ultraviolet light is stronger than silver, the purer aluminum is, its reflection ability is better, and the method of vacuum aluminum plating is commonly used to make high-quality mirrors. Vacuum aluminized film combined with polysilicon film becomes a cheap and lightweight solar cell material. Aluminum powder can maintain a silvery luster, often used to make paint, commonly known as silver powder. Pure aluminum conducts electricity very well, second only to silver and copper. In the electric power industry, it can replace part of copper for wires and cables. Aluminum is a good conductor of heat. It can be used to make various heat exchangers, heat dissipating materials and civil cookers in industry. Aluminum has good ductility, can be drawn into a fine wire, rolled into a variety of aluminum products, but also can be made into thinner than 0.01mm aluminum foil, widely used in packaging cigarettes, candy, etc.. Aluminum alloy has some better properties than pure aluminum, which greatly expands the application range of aluminum. For example, pure aluminum is soft, when a certain amount of copper, magnesium, manganese and other metals are added to aluminum, the strength can be greatly improved, almost equivalent to steel, and the density is small, not easy to rust, widely used in aircraft, cars, trains, ships, artificial satellites, rockets manufacturing. At -196 ° C, some steel is as brittle as glass, while some aluminum alloys increase in strength and toughness, making them cheap and lightweight cryogenic materials that can be used to store liquid oxygen and hydrogen for rocket fuel.

    PRODUCT

    Surface Treatment: Polished
    Technique: Cold Drawn
    Hardness: standard
    Al (Min): 99%
    Material: Aluminun
    Temper: T3 - T8
    Tolerance: ±1%
    Sample: Avaliable
    Application: construction
    Shape: Round
    Yield (≥ MPa): 90
    Ultimate Strength (≥ MPa): 30
    Processing Service: Cutting
    Surface: Polished
    Length: 1m-6m
    Package: Standard Seaworthy Package
    Standard: ASTM AISI JIS DIN GB

    Aluminum Production Process

    ADVANTAGE

    Professional sales team,providing customers with first-class services;

    Professional sales team,providing customers with first-class services;

    Advanced scientific and technical team to improve production and reduce costs for customers

    Intimate shipping logistics team protecting product transportation

    COURSE

    ■ Roll casting

    Aluminium ingot into quiet place furnace and vertical plate with casting machine, the thickness is 7.7 to 5.5 thick thick burrs, the 1060-1260-1360-1460-1560 and then transferred to the cold machine,, cold machine cutting quantity at least 3 cm,Casting of blank are generally burrs out, to the round edge, and then to the cold.

    ■  Cold rolling

    Tied to the thickness we need, to 14 and 24, if it's 24, annealing directly.

    ■  Annealing

    Annealing time probably in 12 hours.

    ■ Forced air cooling 

    The winter air about 12 hours, air-cooled 18 to 20 hours of summer can only be air cooled through finished product.
    ■ Packaging

    Customize the packaging according to customer's requirements.

    Key words:
    • 6061-T6 Aluminum bar

Get a Free Quote


To: Tianjin Bohai Metal Company


Action
I would like some more details. Product Requirements: Customization: Delivery Time: Payment: Shipping: Usage:
((Max 5 files. Support jpg, jpeg, png, gif, txt, doc, pdf, xls, docx, xlsx, less than 5MB))

Contact & Optional Details

Send Inquiry Now